Le refuge ^_^
 
Recherche Avancée...
   
 
Les Blogs ^_^ Forum S'enregistrer Liste des Membres Groupes d'utilisateurs L'herbier Logithèque
Chat Irc!
Jeux  
 
 

Le refuge ^_^ Index du Forum Le menu et la météo du jour Boot Device not found Hp [Resolved]
Montrer les messages depuis:   
      Toutes les heures sont au format GMT + 1 Heure  
Poster un nouveau sujet  Répondre au sujet

Jeu Mar 26, 2020 11:24
Message Auteur Message
isabellarossellini
flocon
flocon


Inscrit le: 25 Mar 2020
Messages: 3




Sujet du message:  Boot Device not found Hp [Resolved] Répondre en citant

It's quite annoying when your computer is unable to Boot, and you get the boot device not found on your Hp computer.

Here you will learn how you can solve this problem.

Boot errors are prevalent, and even a top brand like hp is not free from it.

Though manufacturers have a long-range of troubleshooting guides and tools to tackle the error, still the user faces the boot device not found Hp error.

Primary Boot device reset
Sometimes there is a mismatch in boot device and a wrong Boot device selected in BIOS will give the Boot device not found error.

To reset the primary Boot device;

Restart your computer.
Now restart it again and repeatedly press the F10 function key.
You will enter the BIOS settings window.
When you are on the BIOS setup screen, press F9 function key.
This will select and load the default settings of the BIOS setup.
Now press F10 key.
You will see a message stating save and exit.
Select yes.
Now restart your computer again.
If your system boots normally, the issue is resolved then.
Hard reset could do the trick
Hard reset is done to re-establish the connection settings between the hardware and software components.

When you hard reset, it erases all the previous settings in the memory and restore the default functionality, which in turn may solve the "boot device not found in Hp error".

To hard reset, first, turn off your hp laptop.
Now disconnect any external devices such as mouse and ac adapter from the laptop.
Now remove the battery.
When done, now press and hold power button for up to 20 seconds.
It will drain the residual charge left in the capacitors, which protects the memory.
Now plug in the battery in the battery compartment and insert the ac adaptor.
Make sure that you do not connect any external device such as USB, printer, etc. yet.
Before downloading the driver, ensure the correct operating system is chosen.
Power on your computer, and if prompted for, select start windows normally.
Use HP PC Hardware Diagnostics tool to test the hard drive
A faulty hard drive is the most probable reason that results in the Boot device not find error.

You have to check the hard drive for any issue. Fortunately, Hp laptops come with a built Diagnostics tool that can test whether or not your hard drive is working correctly.

To use the tool first turn off your computer.
Restart it again and rapidly press the ESC key.
A menu will appear press the F2 function key.
Select the hard drive from the component test menu.
Select the quick test option and press run once.
It will take few minutes for the test to complete.
If it shows everything is all right with your hard drive, but the problem persists, then you should opt for extensive test.
The extensive test may find if there is any issue with your hard drive.
Dually note it down and then contact the Hp support team.
Repair boot sector or MBR
A corrupted master boot record (MBR) will cause your computer system to show Boot device not found as it contains the information about Hard disk partition and loads the operating system you run on your computer.

Insert the Windows installation disk the optical derive.
Now select the startup repair option and let it run.
See if the problem is resolved or not.
If the issue persists then rerun the installation disk and select repair windows.
Windows recovery option will be listed, choose command prompt.
Now type Bootrec.exe and press enter.
Now type Bootrec.exe /FixMbr. It will rectify the MBR corruption issue.
Type Bootrec.exe /FixBoot. This command will write the new Boot sector.
Exit the window and restart your computer.
Hopefully, all these solutions will resolve the Boot device not found in Hp problem. If still, you have any questions or any parts not clear to you, Call to us at 1-877-353-6650, and we will try to help you as earliest as possible for Hp printer setup and Hp printer installation also.

hp printer support | hp printer offline
   
 
isabellarossellini n'est pas connecté  View user's profile Send private message
      Remonter...  

Sam Avr 11, 2020 12:50
Message Auteur Message
isabellarossellini
flocon
flocon


Inscrit le: 25 Mar 2020
Messages: 3




Sujet du message:  How to install Canon Printer MF232W in ubuntu Répondre en citant

Being one of the largest manufacturers of electronics, Canon has been selling various kinds of printers that are widely used. Earlier drivers of Canon Printer MF232W s were available only for Windows and Machintosh. But now the drivers are also available platforms like Linux/Ubuntu on all printers..

How to install Canon MF232W printer in Ubuntu?
When you want to install Canon Printer MF232W driver specifically for Linux/Ubuntu, it is important to add PPA repository.

Open Terminal Therefore, you should open a terminal by either making a search of the terminal from the software launcher or you may choose to use three keys together i.e. Ctrl+Alt+T.
At this stage, you must add the following given PPA into your Ubuntu System to proceed: sudo add-apt-repository ppa:michael-gruz/canon
You have to type the user password when it asks and press Enter to proceed further.
Setup Utility
For Ubuntu 16.04, you need to run sudo apt-get update so that you can refresh system catch to begin the installation. Thus, you must type the following: sudo apt install cnijfilter2 scangearmp2 cndrvcups-utility
Installing drivers for Canon Printer MF232W At this stage, you need to disconnect the computer from the printer or you may choose to turn off MF232W printer.
Thereafter, you can install Canon Printer MF232W driver with the following given command: sudo apt-get install cnijfilter- mf232w series
Using the above-mentioned command, the Canon Printer MF232W driver will get installed.
The Computer can now be connected with the Canon Printer MF232W and it must be turned on.
Finally, the Canon Printer MF232W will be detected and connected by the system on its own.
Alternatively, in case the drivers are not installed using the above command, you can search for cnijfilter for printing in Synaptic package manager that is provided by Ubuntu Software.
Further, select install driver that is suitable for your device and press OK in order to install
Canon Printer.
The Printer is ready to use and can be tested for printing.
What if I want to uninstall the drivers for Canon Printer MF232W?
When you want to remove the drivers for Canon Printer MF232W, you have to run the following given command : sudo apt remove --autoremove cnijfilter2 scangearmp2 cndrvcups-utility cnijfilter-* scangearmp-*
If you want to remove the PPA repository, simply go to Software & Updates and then click Other Software

lexmark printer support | lexmark printer offline
  _________________
canon printer offline | canon printer setup  
 
isabellarossellini n'est pas connecté  View user's profile Send private message
      Remonter...  
Poster un nouveau sujet  Répondre au sujet

Le refuge ^_^ Index du Forum Le menu et la météo du jour Boot Device not found Hp [Resolved]
Vous ne pouvez pas poster de nouveaux sujets dans ce forum
Vous ne pouvez pas répondre aux sujets dans ce forum
Vous ne pouvez pas éditer vos messages dans ce forum
Vous ne pouvez pas supprimer vos messages dans ce forum
Vous ne pouvez pas voter dans les sondages de ce forum
Vous ne pouvez pa joindre des fichiers dans ce forum
Vous pouvez télécharger des fichiers dans ce forum


      Remonter...  

Page 1 sur 1
Sauter vers:  
Powered by phpBB © 2001, 2002 phpBB Group
Traduction par : phpBB-fr.com
Avalanche style by What Is Real © 2004